- All
- Product Management
- News and Information
- Introduction content
- Business locations
- Frequently Asked Questions
- Corporate video
- Business Portfolio
Kangda Electric Furnace Thyristor Water-Jacket Cooling Inspection
Aug 03,2023
The thyristor is clamped inside a cooling water jacket, and cooling is achieved by circulating water through the jacket. It’s important to periodically check the water passages in the water jacket every six months. If the water flow is inadequate, it could lead to damage of the thyristor.
When replacing the thyristor, remove the fixing screw at one end of the water jacket, loosen the three tightening screws of the water jacket, install the appropriate thyristor, and then tighten the water jacket’s tightening screws again. When tightening the three water jacket tightening screws, make sure that all three screws are tightened evenly and with equal force.
Related News
Kangda Electric Furnace specializes in the manufacture of the following equipment: KGCL series medium-frequency power supplies, KGPS series medium-frequency power supplies, GTR series medium-frequency induction heating furnaces...
Contact Information
Address: Yuhe Industrial Park, Weicheng District, Weifang City, Shandong Province
Scan to follow us
Scan to follow Douyin.